LDM5710
---
high power
be used to
Long Distance
with isolated cable
to protect noise & static electricity
Projected line 4~5 M at 2.0~3.0M distance
* Double grounding protection
* 70℃
Laser diode
* Long lifetime
|
Characters
of LDM5710 |
1. |
Noise Guarded |
|
|
LDM5710 with special design, isolated cable to protect noise & static
electricity. |
|
But keep away from the source of static electricity is necessary. |
|
Laser Marker may be setup beside motor or the other noise parts. So the
circuit of |
|
Laser Driver have some filter and condenser to decrease or absorb
noise. |
2. |
High Temperature |
|
|
Although the series of LDM5710 use the high temperature LD(70℃),
please keep |
|
the ambient temperature below 40℃ to increase
lifetime. |
3. |
Isolation |
|
|
The Laser gun is sealed tightly to protect dust. You just have to clean
the |
|
window of laser output. |
|
And the laser diode is isolated from cover to protect noise. |
4. |
Straight Line |
|
|
The Projected line of Laser Marker compare with lever each one, so it |
|
must be straight. |
5. |
Sharp / Bright |
|
|
The Projected line of Laser Marker very thin, the width is 1.0~3.0mm, |
|
depend on color of workpiece. And the line is bright smoothly. |
6. |
Use Friendly |
|
|
The Laser marker can be used in stone machine, wood machine, |
|
tire machine, textile industry, screen printing, forming machine or
alignment. |
|
And the holder of Laser Marker can be fixed easily. |
7. |
Full Range Input |
|
|
The input power voltage is full range and auto switching, can be from |
|
90 to 230VAC. |
8. |
Well Reliability |
|
|
Each Marker's input power supply is 4~5 times and output power is 2
times |
|
design. And each Marker out of factory after 7 days tested stably. |