ACME 產品 3

LASERMAN LDM21

A visible sharp, precise and accurate line for cutting, marking and assembly.

For Motorcycle , Bicycle or Light Truck of Tire Building Machine

* Line 1.5~2.5 M at

0.8~1.2M distance
* 50℃ Laser diode
* Sharp & bright
* Long lifetime

　

Characters	Connecter	Power Supply	Fixture	Laser diode	Laser Output	Laser Endurable Temperature	Lifetime	Work Distance
LDM21Y	Y-Terminal	PSY5	AD	12mW	3~4mW	50℃	> 2 years	0.8~1.2 M
LDM21K	Y-Cable	PSY5	AD	12mW	3~4mW	50℃	> 2 years	0.8~1.2 M

	Characters of LDM21Y / LDM21K
1.	Straight Line
	The Projected line of Laser Marker compare with lever each one, so it
	must be straight.
2.	Sharp / Bright
	The Projected line of Laser Marker very thin, the width is 0.8~1.2mm,
	depend on color of workpiece. And the line is bright smoothly.
3.	Use Friendly
	The Laser marker can be used in stone machine, wood machine,
	tire machine, textile industry, screen printing, forming machine or alignment.
	And the holder of Laser Marker can be fixed easily.
4.	Full Range Input
	The input power voltage is full range and auto switching, can be from
	90 to 230VAC.
5.	Noise Guarded
	Laser Marker may be setup beside motor or the other noise parts. So the
	circuit of Laser Driver have some filter and condenser to decrease or
	absorb noise.
6.	High Temperature
	And the series of LDM21Y / LDM21K no temperature control, so they
	suitable for ambient below 40℃.
7.	Isolation
	The Laser gun is sealed tightly to protect dust. You just have to clean the
	window of laser output.
	And the laser diode is isolated from cover to protect noise.
8.	Well Reliability
	Each Marker's input power supply is 4~5 times and output power is 2 times
	design. And each Marker out of factory after 7 days tested stably.